Posted in: Hacks, Latest, Software

The Guide to Setting Up Any Wireless Router Easily

Whenever you get a new router, you need to set it up as per your requirements. However, you cannot do it if you do not know about the basic things of setting up a router. This guide will help you to set up any router that you have brought.

Each router is a world different from other, and therefore it is impossible to say with certainty where each section is located in each model. In each section, we have put some examples of different models that will help to find the corresponding section in each different model.

Thus, here we are with the very basic knowledge which you must have while setting up a router.

#1 How to access the router’s web configuration

It’s recommended using the process that includes the configuration using the web server.  Because it’s easy and user-friendly too.

To access the config page simply type “ipconfig” in command prompt which can be accessed by typing “cmd“, in the run box.

Here we will look for the IP address of the gateway and enter it to access this configuration web. Most of the routers use 192.168.l.l IP Address which you can access at 19216811.zone. (Note if you find it’s not working then maybe your router is using secondary IP 192.168.0.1, you can visit “https://19216811.zone/192-168-0-1” to access that page.)

#2 Entering the Password to access further settings

Routers are password protected to prevent unauthorized users from accessing them. If we have changed the password and did not know it, we must reset the router to the default values so that, among other things, the default passwords are configured.

Regarding passwords by default, the most used by most routers are:

admin/
/admin
admin/admin
1234/admin
admin/1234
1234/234

If none of them works, we should consult the manual or the sticker on the bottom where they are usually written.

#3 Securing our access points

To prevent users from connecting to our access point and to be able to navigate through the Internet with our connection, we must configure a series of security measures.

The first thing we must do is choose the type of encryption we are going to use. We can not leave the network open because anyone would connect to it and our traffic would not be encrypted or use a simple exploit algorithm that allows knowledgeable users to obtain our password.

The best option that we should choose in the encryption section is:
WPA2-PSK [AES]

Once this type of encryption has been selected, we can configure the access code. Having selected a WPA2 security password can have the characters we want, both uppercase and lowercase or symbols. For example:
## ConTR4s3Na_dMi_RuT3r1990 ##
The more complex the password and simple to remember for oneself, the better.

Some access points offer the possibility to configure WPA2 TKIP + AES. This means that devices that are compatible with WPA2 will use this type of encryption to connect, but those that are not will use the TKIP encryption, corresponding to WPA and less secure than WPA 2.

#4 Selecting frequency, 2.4Ghz or 5Ghz?

As for the frequency, if our router and all the devices connected to it support the 5Ghz technology we should use this as it has fewer devices that use it. It offers better coverage, higher speed, and better stability. However, if one of our devices does not support this frequency it will not be able to connect to the Internet, so then we must configure the network to 2.4Ghz and choose the least saturated channel.

Most current routers have an automatic channel analysis so that they will choose the least saturated to work with.

#5 MAC filtering

Some models allow you to configure a “MAC Filtering” that analyzes all MAC addresses that connect to the access point and allows or blocks access according to the configuration.

If our AP has this function, we can add to the “whitelist” the MAC addresses of our devices configuring this filtering so that only those MAC addresses included in the whitelist can connect to the Internet, leaving all the others (for example, users not authorized) with blocked access.

#6 Open Ports

Opening ports are one of the most requested actions by users. The ports are usually used to establish connections of different applications with the corresponding remote servers to work, for example, a torrent client to download or an online game to be able to connect to the server of said game.

Each application usually uses a single port between 0 and 65535, although the first 1024 are reserved for simple applications and should not be used (for example port 80 is HTTP, 443 HTTPS, 21 FTP, 22 SSH, etc.).

If we want our connection to work correctly, we must open in our router the ports used by the application that we are going to use, linking each port to the IP address of our computer.

#7 UPnP

Some router models come with a UPnP server by default. This server is responsible for communications are carried out correctly without having to worry about the ports (since he is responsible for redirecting traffic) opening connections when necessary and closing them when they are no longer needed.

#8 Configure a DDNS server

Users who need to connect from outside the home to their computers or resources can choose to configure a DDNS server or Dynamic Domain Name Server. This allows our IP address, even if dynamic, to be always updated and linked to a domain of the style: my_name.no-ip.org.

#9 Update the Firmware

The firmware of a router is what we know as the operating system. This usually receives updates periodically in which new functions and features are included while correcting essential security flaws that may appear over time, so it is vital to always keep the most updated versions to navigate safely through the network.

#10 Set up a parental control

The parental control allows to block specific web pages not suitable for minors and even filter certain words so that in case of finding a web with such content, it does not get to be established.

For those parents who have minors under their responsibility, this option can help (although it is not 100% effective) to the child does not access web pages not recommended for him being blocked in the router and registered in the registry of the router itself. You may also check their official site for further instructions.

Conclusion

These were some of the things which you should know while setting up a router. If we have missed out on anything then please let us know about it in the comments section below.

Leave a Reply

Your email address will not be published. Required fields are marked *